[Docs] Document (non-)custodial staking

Makefile

@@ -680,7 +680,7 @@ supplier3_stake: ## Stake supplier3
 
 .PHONY: supplier_unstake
 supplier_unstake: ## Unstake an supplier (must specify the SUPPLIER env var)
-	poktrolld --home=$(POKTROLLD_HOME) tx supplier unstake-supplier --keyring-backend test --from $(SUPPLIER) --node $(POCKET_NODE)
+	poktrolld --home=$(POKTROLLD_HOME) tx supplier unstake-supplier $(SUPPLIER) --keyring-backend test --from $(SUPPLIER) --node $(POCKET_NODE)
 
 .PHONY: supplier1_unstake
 supplier1_unstake: ## Unstake supplier1

docusaurus/docs/operate/configs/supplier_staking_config.md

@@ -10,8 +10,12 @@ a stake transaction required to provide RPC services on Pocket Network._
 
 - [Reference Example](#reference-example)
 - [Usage](#usage)
+- [Staking types](#staking-types)
+  - [Custodial Staking](#custodial-staking)
+  - [Non-Custodial Staking](#non-custodial-staking)
 - [Configuration](#configuration)
   - [`owner_address`](#owner_address)
+  - [`operator_address`](#operator_address)
   - [`stake_amount`](#stake_amount)
   - [`default_rev_share_percent`](#default_rev_share_percent)
   - [`services`](#services)
@@ -44,6 +48,42 @@ poktrolld tx supplier stake-supplier \
   --node tcp://poktroll-node:26657
 ```
 
+## Staking types
+
+The `Supplier` staking command supports two types of staking:
+
+### Custodial Staking
+
+The owner of the `Supplier` is the same as the operator.
+This means the account that receives the rewards is the same as the one that
+signs the `RelayResponse`s and submits claims and proofs.
+
+Custodial staking is the simplest to set up and manage, as there is no need to
+manage multiple accounts. It is suitable for `Supplier`s that do not have concerns
+about using the private key of the staking or the rewarded account to operate the
+`RelayMiner` or update the `Supplier`'s stake and services.
+
+### Non-Custodial Staking
+
+The owner of the `Supplier` is different from the operator.
+This means the account that receives the rewards is different from the one signing
+the `RelayResponse`s and submitting claims and proofs.
+
+Non-custodial staking is suitable for `Supplier`s that want to separate the staking
+or the rewarded account (i.e., the account that holds the `upokt` stake or rewards)
+from the account operates the `RelayMiner`.
+
+:::note
+
+When staking a `Supplier`, the signing account specified with the `--from` flag
+(which may differ from the `Supplier`'s owner or operator) will have its `upokt`
+balance deducted to stake the `Supplier`.
+
+When unstaking a `Supplier`, the staked `upokt` will be returned to the `owner_address`
+account.
+
+:::
+
 ## Configuration
 
 ### `owner_address`
@@ -54,10 +94,60 @@ _`Required`_, _`Non-empty`_
 owner_address: <address>
 ```
 
-The `owner_address` is used as the unique shareholder address for the `Supplier`
+The `owner_address` is the address of the account that owns the `Supplier`s staked
+funds, which will be returned to this account when the `Supplier` unstakes and finishes
+unbonding.
+
+For custodial staking, the `owner_address` is the same as the `operator_address`.
+
+For non-custodial staking, the `owner_address` must be different from the `operator_address`.
+This address receives back the staked `upokt` when the `Supplier` is unstaked.
+
+The `owner_address` can only be changed with a stake message signed by the
+`Supplier`'s owner account.
+
+It is also used as the unique shareholder address for the `Supplier`
 if none of `default_rev_share_percent` or `rev_share_percent` is defined in the
 configuration file.
 
+:::note
+
+The `owner_address` does not identify a `Supplier`; multiple `Supplier`s can have
+the same `owner_address`.
+
+:::
+
+### `operator_address`
+
+_`Optional`_, _`Non-empty`_
+
+```yaml
+operator_address: <address>
+```
+
+The `operator_address` is the address that identifies the `Supplier`.
+Its corresponding account is used for operational tasks such as signing `RelayResponse`s,
+submitting `Claims` and `Proofs` as well as updating the `Supplier`'s info
+(i.e. Adding or removing services, increasing the stake amount, etc).
+
+The operator account can also be used to unstake the `Supplier` and send the staked
+`upokt` back to the `owner_address`.
+
+If the `operator_address` is not specified, the `owner_address` is used as the
+`operator_address`.
+
+If the `operator_address` is the same as the `owner_address`, then the staking
+is custodial.
+
+:::warning
+
+Since the `operator_address` is the unique identifier of a `Supplier`, it cannot
+be changed once the `Supplier` is created. If it needs to be changed, then the
+corresponding `Supplier` has to be unstaked and a new one staked with the new
+`operator_address`.
+
+:::
+
 ### `stake_amount`
 
 _`Required`_, _`Non-empty`_

localnet/poktrolld/config/supplier1_stake_config.yaml

@@ -1,26 +1,15 @@
 owner_address: pokt1mrqt5f7qh8uxs27cjm9t7v9e74a9vvdnq5jva4
-# NB: The stake amount is exactly 1upokt greater than the value in genesis.json
-# so that the stake command causes a state change.
+operator_address: pokt1mrqt5f7qh8uxs27cjm9t7v9e74a9vvdnq5jva4
 stake_amount: 1000069upokt
-# If default_rev_share_percent is omitted, the owner receives 100% of the rewards.
-# default_rev_share_percent cannot be empty - it must either be omitted completely
-# or include at least one item.
 default_rev_share_percent:
-  # The sum of all shares must equal 100%. Staking will fail otherwise.
   - pokt1mrqt5f7qh8uxs27cjm9t7v9e74a9vvdnq5jva4: 80.5
   - pokt1eeeksh2tvkh7wzmfrljnhw4wrhs55lcuvmekkw: 19.5
 services:
-  # The endpoint URL for the Anvil service is provided via the RelayMiner.
-  # The RelayMiner acts as a proxy, forwarding requests to the actual Anvil data node behind it.
-  # This setup allows for flexible and dynamic service provisioning within the network.
   - service_id: anvil
     endpoints:
       - publicly_exposed_url: http://relayminer1:8545
         rpc_type: JSON_RPC
   - service_id: ollama
-    # Service specific rev share, if rev_share_percent is omitted for a specific
-    # service, default_rev_share_percent is used.
-    # The sum of all shares must equal 100%. Staking will fail otherwise.
     rev_share_percent:
       - pokt1mrqt5f7qh8uxs27cjm9t7v9e74a9vvdnq5jva4: 50
       - pokt1eeeksh2tvkh7wzmfrljnhw4wrhs55lcuvmekkw: 50

localnet/poktrolld/config/supplier2_stake_config.yaml

@@ -1,10 +1,9 @@
+owner_address: pokt1re27pw4llwnatx4sq7rlggqzcm6j3f39epq2wa
+operator_address: pokt1re27pw4llwnatx4sq7rlggqzcm6j3f39epq2wa
 stake_amount: 1000070upokt
 services:
   - service_id: anvil
     endpoints:
-      # The endpoint URL for the Anvil service is provided via the RelayMiner.
-      # The RelayMiner acts as a proxy, forwarding requests to the actual Anvil data node behind it.
-      # This setup allows for flexible and dynamic service provisioning within the network.
       - publicly_exposed_url: http://relayminer2:8545
         rpc_type: JSON_RPC
   - service_id: ollama

localnet/poktrolld/config/supplier3_stake_config.yaml

@@ -1,10 +1,9 @@
+owner_address: pokt1j6dun0x8eyq5mmsmq83zs3c2utt85q8478c89u
+operator_address: pokt1j6dun0x8eyq5mmsmq83zs3c2utt85q8478c89u
 stake_amount: 1000071upokt
 services:
   - service_id: anvil
     endpoints:
-      # The endpoint URL for the Anvil service is provided via the RelayMiner.
-      # The RelayMiner acts as a proxy, forwarding requests to the actual Anvil data node behind it.
-      # This setup allows for flexible and dynamic service provisioning within the network.
       - publicly_exposed_url: http://relayminer3:8545
         rpc_type: JSON_RPC
   - service_id: ollama

localnet/poktrolld/config/supplier_stake_config_example.yaml

@@ -0,0 +1,52 @@
+# This file is used to stake a Supplier or update an existing Supplier's information in the Pocket Network.
+# Pocket Network supports two types of staking mechanisms: custodial and non-custodial staking:
+# * Custodial staking is the default mechanism, where the owner address (i.e., the account that
+#   receives the rewards) is the same as the operator address (i.e., the address that operates
+#   the Supplier).
+# * Non-custodial staking is an advanced mechanism, where the owner address is different from
+#   the operator address. This is useful to avoid overuse of the private key of the
+#   account that owns the staked funds or receives the rewards.
+
+# The address of the supplier's owner. This address could stake a new Supplier or
+# update any of its properties excluding the operator address which is immutable.
+# The account corresponding to this address could also unstake the Suppliers it owns.
+# The owner address does not identify the Supplier in the Pocket Network; the same owner
+# account can stake multiple Suppliers.
+owner_address: pokt19a3t4yunp0dlpfjrp7qwnzwlrzd5fzs2gjaaaj
+
+# The address of the operator of the Supplier. This address operates the Supplier,
+# (i.e., signs relay responses, submits claims and proofs, updates service endpoints, etc.).
+# This address can also used to stake a new Supplier or unstake an existing one.
+# It uniquely identifies the Supplier in the Pocket Network and cannot be changed
+# once the Supplier is created.
+# The operator address is optional; if not provided, the owner address is used as
+# the operator address.
+operator_address: pokt19a3t4yunp0dlpfjrp7qwnzwlrzd5fzs2gjaaaj
+# NB: The stake amount is exactly 1upokt greater than the value in genesis.json
+# so that the stake command causes a state change.
+stake_amount: 1000069upokt
+# If default_rev_share_percent is omitted, the owner receives 100% of the rewards.
+# default_rev_share_percent cannot be empty - it must either be omitted completely
+# or include at least one item.
+default_rev_share_percent:
+  # The sum of all shares must equal 100%. Staking will fail otherwise.
+  - pokt1mrqt5f7qh8uxs27cjm9t7v9e74a9vvdnq5jva4: 80.5
+  - pokt1eeeksh2tvkh7wzmfrljnhw4wrhs55lcuvmekkw: 19.5
+services:
+  # The endpoint URL for the Anvil service is provided via the RelayMiner.
+  # The RelayMiner acts as a proxy, forwarding requests to the actual Anvil data node behind it.
+  # This setup allows for flexible and dynamic service provisioning within the network.
+  - service_id: anvil
+    endpoints:
+      - publicly_exposed_url: http://relayminer1:8545
+        rpc_type: JSON_RPC
+  - service_id: ollama
+    # Service specific rev share, if rev_share_percent is omitted for a specific
+    # service, default_rev_share_percent is used.
+    # The sum of all shares must equal 100%. Staking will fail otherwise.
+    rev_share_percent:
+      - pokt1mrqt5f7qh8uxs27cjm9t7v9e74a9vvdnq5jva4: 50
+      - pokt1eeeksh2tvkh7wzmfrljnhw4wrhs55lcuvmekkw: 50
+    endpoints:
+      - publicly_exposed_url: http://relayminer1:8545
+        rpc_type: REST

x/supplier/module/tx_stake_supplier.go

@@ -23,8 +23,12 @@ func CmdStakeSupplier() *cobra.Command {
 	cmd := &cobra.Command{
 		Use:   "stake-supplier --config <config_file.yaml>",
 		Short: "Stake a supplier",
-		Long: `Stake an supplier with the provided parameters. This is a broadcast operation that
-will stake the tokens and associate them with the supplier specified by the 'from' address.
+		Long: `Stake a supplier using the specified configuration file. This command
+supports both custodial and non-custodial staking of the signer's tokens.
+It sources the necessary information from the provided configuration file.
+
+For more details on the staking process, please refer to the supplier staking documentation at:
+https://dev.poktroll.com/operate/configs/supplier_staking_config
 
 Example:
 $ poktrolld tx supplier stake-supplier --config stake_config.yaml --keyring-backend test  --from $(OWNER_ADDRESS) --node $(POCKET_NODE) --home $(POKTROLLD_HOME)`,