[mjcross]

Add an example of how to attach one of the widely available small OLED displays based on the SSD1309 controller via SPI, complementing the existing SSD1306 example that uses i2c. In fact the two controllers have the same command set so the example should work on either (but I don't have an SSD1306 to test).
For many applications the SPI interface might be a better bet, as it runs a lot faster (10Mbit/sec).

[mjcross]

Incidentally I've also created a similar version that uses a frame buffer updated via DMA direct to the SPI peripheral; but I'll submit that as a separate PR. This version is much easier to understand.

[lurch]

Thank you for the high-quality example 👍
Sorry if I went a bit overboard on the number of comments.

[mjcross]

Thank you for the high-quality example 👍 Sorry if I went a bit overboard on the number of comments.

You're more than welcome! I wanted to use one of these displays in a current project, and writing it up as an example encourages me to do a better job. Your comments are really helpful and always on point :-)

I'll be interested to see what you think of the DMA frame-buffer version, which should be ready in the next day or two. First time I've dipped my toe into using DMA and it's a really well designed API 👍