Update Commands.md

Missing space, it is Scheme 1, not Scheme1.

docs/Commands.md

@@ -438,7 +438,7 @@ LedPwmOff<a class="cmnd" id="ledpwmoff"></a>|`0..255` = set LED brightness when
 LedPwmOn<a class="cmnd" id="ledpwmon"></a>|`0..255` = set LED brightness when ON
 LedTable<a class="cmnd" id="ledtable"></a>|`0` = do not use [LED gamma correction](https://learn.adafruit.com/led-tricks-gamma-correction?view=all) *(default &laquo;6.5.0.9)*<BR>`1` = use gamma correction *(default &raquo;6.5.0.9)*
 MultiPWM<a class="cmnd" id="multipwm"></a><BR>SetOption68<a class="cmnd" id="setoption68"></a>|Multi-channel PWM instead of a single light<BR>`0` = Treat [PWM](#pwm) as a single light *(default)*<BR>`1` = Treat [PWM](#pwm) as separate channels. In this mode, use [`Power<x>`](#power) to turn lights on and off, and [`Channel<x>`](#channel) to change the value of each channel.<BR>[`Color`](#color) still works to set all channels at once.<BR>***Requires restart after change***
-Palette<a class="cmnd" id="palette"></a>| `0` = Clear color palette<br>`[ ...]` = Set list of colors used by `Color<1,2>` and `Scheme<2,3,4>` commands with each color separated by a space. The palette setting is not saved to flash. Use a boot-time rule such as ON System#Boot DO Palette xxxxx ENDON to set it back at each restart.
+Palette<a class="cmnd" id="palette"></a>| `0` = Clear color palette<br>`[ ...]` = Set list of colors used by `Color<1,2>` and `Scheme <2,3,4>` commands with each color separated by a space. The palette setting is not saved to flash. Use a boot-time rule such as ON System#Boot DO Palette xxxxx ENDON to set it back at each restart.
 Pixels<a class="cmnd" id="pixels"></a>|`1..512` = set amount of pixels in strip or ring and reset [`Rotation`](#rotation) *(applies only to addressable LEDs)*
 PowerOnFade<a class="cmnd" id="poweronfade"></a><BR>SetOption91<a class="cmnd" id="setoption91"></a>|Enable `Fade` at boot and power on. By default fading is not enabled at boot because of stuttering caused by wi-fi connection<BR>`0` = don't Fade at startup _(default)_ <BR>`1` = Fade at startup
 PWMCT<a class="cmnd" id="pwmct"></a><BR>SetOption92<a class="cmnd" id="setoption92"></a>|Alternative to `Module 38`: for Cold/Warm white bulbs, enable the second PWM as CT (Color Temp) instead of Warm White, as required for Philips-Xiaomi bulbs.<BR>`0` = normal Cold/Warm PWM _(default)_ <BR>`1` = Brightness/CT PWM<BR>See [PWM CT in Lights](Lights.md#pwm-ct)