To assemble print this Paddle wheel you will need:
- (2) MB_end_cap_v4_open.stl
- (1) MB_accoustic_tube_v1.stl
- (1) MB_knob_v1.stl
- (1) MB_mic_cup_sm57b.stl
To assemble print this Paddle wheel you will need:
- (2) MB_end_cap_v4_amplified.stl
- (6) MB_end_cap_amplified_post.stl
- (1) MB_tube_v4.stl
- (1) MB_knob_v1.stl
- (1) MB_mic_cup_sm57b.stl
After the parts are assembled they can be glued in place, or simply use pressure fit.