Tools: explicitly set AP_PERIPH_XX_ENABLED defines to 0 for sitl_periph_gps and sitl_periph_battmon #42920
Annotations
10 errors and 1 warning
|
test sitltest-copter-tests2b:
Tools/autotest/arducopter.py#L6170
vehicle_test_suite.NotAchievedException: Double-notch peak was higher than single-notch peak -25.610261dB > -27.539639dB
|
|
test sitltest-copter-tests2b:
Tools/autotest/arducopter.py#L6194
File "/__w/ardupilot/ardupilot/Tools/autotest/arducopter.py", line 6170, in DynamicNotches
|
|
test sitltest-copter-tests2b
"DynamicNotches (Use dynamic harmonic notch to control motor noise.)": NotAchievedException('Double-notch peak was higher than single-notch peak -25.610261dB > -27.539639dB') (see /tmp/buildlogs/ArduCopter-DynamicNotches-retry-1.txt)
|
|
test sitltest-copter-tests2b:
Tools/autotest/arducopter.py#L6170
vehicle_test_suite.NotAchievedException: Double-notch peak was higher than single-notch peak -24.352945dB > -28.126556dB
|
|
test sitltest-copter-tests2b:
Tools/autotest/arducopter.py#L6194
File "/__w/ardupilot/ardupilot/Tools/autotest/arducopter.py", line 6170, in DynamicNotches
|
|
test sitltest-copter-tests2b
"DynamicNotches (Use dynamic harmonic notch to control motor noise.)": NotAchievedException('Double-notch peak was higher than single-notch peak -24.352945dB > -28.126556dB') (see /tmp/buildlogs/ArduCopter-DynamicNotches-retry-2.txt)
|
|
test sitltest-copter-tests2b:
Tools/autotest/arducopter.py#L6170
vehicle_test_suite.NotAchievedException: Double-notch peak was higher than single-notch peak -25.517010dB > -26.993487dB
|
|
test sitltest-copter-tests2b:
Tools/autotest/arducopter.py#L6194
File "/__w/ardupilot/ardupilot/Tools/autotest/arducopter.py", line 6170, in DynamicNotches
|
|
test sitltest-copter-tests2b
"DynamicNotches (Use dynamic harmonic notch to control motor noise.)": NotAchievedException('Double-notch peak was higher than single-notch peak -25.517010dB > -26.993487dB') (see /tmp/buildlogs/ArduCopter-DynamicNotches-retry-3.txt)
|
|
test sitltest-copter-tests2b:
Tools/autotest/arducopter.py#L6086
vehicle_test_suite.NotAchievedException: Detected motor peak at 103.948299Hz, throttle 36.000000%, 6.072780dB
|
|
test sitltest-copter-tests2b
‘buff’ may be used uninitialized [-Wmaybe-uninitialized]
|
Loading