forked from rusefi/rusefi
-
Notifications
You must be signed in to change notification settings - Fork 0
Mazda RX8 2004
David Holdeman edited this page Jan 25, 2022
·
4 revisions
bLue/White: CAN high
Green/Black: CAN low
Black: Ground
Black/Yellow: 12v
Blue/Red: 12v
Reverse Engineering the RX8s instrument cluster part one
The CAN-bus id's in the case of the RX-8 (and likely Mazda6 / MX-5)
ID 300 is turn off Steering Warning Light, minimum 0.5 sec timing.
ID 212 is abs, dsc off, traction control warning and brake warning, minimum 0.5 sec timing.
ID 420 is temp, oil pressure gauge, coolent level, battery (alternator), oil warning and check engine light, minimum 5 second timing.
ID 201 is Speed (Max 300.00 Km/h, 186mph [9C 40] and RPM (Max 16382 [FF FE], although scale goes non-linear after 10k), minimum 0.5 sec timing.
See also CAN Sniffer
- How to search the Wiki
- Quick Start
- How to ask questions
- Support
- How to create a TunerStudio project
- HOWTOs and FAQs
- rusEFI project overview
- rusEFI Online
- rusEFI virtual simulator
- Fueling
- Multispark
- Cranking
- Electronic Throttle
- Knock Sensing
- Variable Valve Timing
- Lua Scripting
- GDI
- Digital Dash
- rusEFI Hardware Overview
- Wiring & Connectivity Overview
- rusEFI Assembly Completeness Chart
- Kit Instructions
- Hellen Miata 90-95
- Hellen Miata 96-97
- Hellen Miata 99-00
- Hellen Miata 01-05 VVT
- MREAdapter55: from Lada to e30
- Frankenso MazdaMiataNA6 PnP
- Creating a PnP PCB